DJI Amflow PL Carbon 2026
The 2026 DJI Amflow PL Carbon represents a quantum leap in electric mountain biking. Powered by drone giant DJI’s Avinox M1 mid-drive motor, it generates 120 Nm of Boost torque and 1,000W peak power while keeping total bike weight to an astonishing 42.3 lbs (19.2 kg).
The Good
- Unrivaled 120 Nm Boost torque in an agile 42.3 lb full-carbon enduro package
- 1.5-hour fast charging (0-75%) via 508W GaN charger revolutionizes multi-ride days
- Fox 36 Factory Grip X2 fork and Magura MT7 Pro 4-piston hydraulic brakes
- Wireless Bluetooth handlebar pods create the cleanest cockpit in the e-MTB industry
- Class 1 singletrack trail legal compliance across US and European trail systems
The Bad
- Premium $7,500 to $10,500 price range represents a significant financial investment
- Non-removable battery design requires bringing complete bike near an AC outlet
- High torque output can accelerate chain wear if shifted under full 120 Nm load
- Proprietary DJI drive electronics require authorized service centers for motor repairs
Aerospace Motor Telemetry & GaN Fast-Charging
A 2.52 kg aerospace-grade mid-drive motor generating 105 Nm continuous torque and 120 Nm in 30-second Boost mode, paired with a GaN 12A fast charger.
DJI Avinox 120 Nm Boost Power & Torque Curve
120 Nm Peak @ 20-110 RPM CadenceSpeed, Climbing & Descents
Tested across steep alpine rock gardens, technical root steps, and high-speed flow trails.
2.27 kg Carbon Frame & Wireless Cockpit
The ultra-lightweight carbon frame weighs just 2.27 kg and features an integrated 2-inch top-tube OLED touchscreen with wireless Bluetooth handlebar controllers.
160mm/150mm Fox Factory Suspension
Fox 36 Factory Grip X2 fork (160mm) and Fox Float X Factory rear shock (150mm) provide enduro-level compliance with mullet flip-chip adjustability.
Top-Tube OLED Display & Master Specs Board
Integrated 2-inch color OLED touchscreen, dual wireless handlebar thumb remotes, GaN fast-charge battery interface, and customizable ride modes.
DJI Amflow PL Carbon Master Technical Specifications
Powertrain & Motor
Battery & Electrical
Chassis & Suspension
Dimensions & Pricing
Verdict & Decision Matrix
Why You Should Buy
- You want the highest power-to-weight ratio in the e-MTB world: 120 Nm torque at just 42.3 lbs.
- You value rapid 1.5-hour 75% GaN recharging for multi-session backcountry riding days.
- You demand top-tier Fox Factory suspension, SRAM Eagle Transmission, and Magura brakes.
Why You Might Skip
- You have a budget under $6,000 for an electric mountain bike.
- You require a removable battery for off-bike charging in remote locations.
DJI Amflow PL Carbon 2026 In-Depth Road Test & Motor Telemetry
DJI’s entrance into the e-MTB market with the Amflow PL Carbon has disrupted established drive systems from Bosch, Shimano, and Brose. The Avinox M1 motor delivers 396 W/kg of power density—nearly double that of traditional competitors.
On steep 25% singletrack climbs, the 120 Nm Boost mode allows riders to clear rock ledges and technical root steps with minimal pedal effort, while the 42.3 lb weight preserves playful agility on downhill berms and jumps.
"DJI has brought drone-grade power density, GaN fast charging, and touchscreen cockpit sophistication to electric mountain biking."
Frequently Asked Questions
Yes, it complies with Class 1 e-MTB regulations (max 20 mph assist, no throttle) and is legal on Class 1 permitted singletrack trails.
With the included 12A GaN fast charger, the 800Wh battery charges from 0% to 75% in just 1.5 hours.
The top-spec Pro model weighs just 42.3 lbs (19.2 kg), while the standard Comp model weighs 44.5 lbs.